ps2模拟器pc版

Controller support is limited on Windows PCs. While the latest generation of console controllers will work out of the box with Windows, even last-generation gamepads like the PlayStation 3’s DualShock 3 require .

在Windows PC上，控制器支持受到限制。 尽管最新一代的控制台控制器可以在Windows上使用，但即使是最新一代的游戏手柄，如PlayStation 3的DualShock 3，也需要 。

A previous version of this article detailed the use of MotioninJoy to use your Sony PS3 controller as a joystick on your Windows PC. Unfortunately, MotioninJoy was a proprietary piece of software that turned into malware over the years.  Luckily, you don’t have to infect your computer, as there is an open-source alternative in . Don’t use MotioninJoy.

本文的早期版本详细介绍了使用MotioninJoy来将Sony PS3控制器用作Windows PC上的操纵杆。 不幸的是，MotioninJoy是多年来一直变成恶意软件的专有软件。 幸运的是，您不必感染计算机，因为有一个开源替代方案。 不要使用MotioninJoy。

如何安装ScpToolkit (How to Install ScpToolkit)

ScpToolkit has to modify some system drivers to make the controller work, so it’s not the safest install process. Proceed with caution, follow our instructions, and don’t click anything you don’t understand.

ScpToolkit必须修改一些系统驱动程序才能使控制器正常工作，因此这不是最安全的安装过程。 谨慎行事，请遵循我们的指示，不要单击您不了解的任何内容。

Download the of ScpToolkit from the project’s Github page, open up the setup program, and agree to the Terms and Conditions—if you read them, of course. You’ll be shown a dialog with a list of install options:

从项目的Github页面下载的ScpToolkit，打开安装程序，并同意条款和条件(如果您阅读它们，当然)。 将显示一个对话框，其中包含安装选项列表：

You probably don’t need the Gamepad Analyzer and Debug Info Collector, but you should install everything else.

您可能不需要Gamepad Analyzer和Debug Info Collector，但是您应该安装其他所有东西。

The installation process will take a few minutes. You should take this time to find your PS3 controller and plug it in with a USB cable. After the utility is done installing the toolkit, it will ask you to run the driver installer. Click “Run,” and you’ll be shown a list which should now include your controller.

安装过程将花费几分钟。 您应该花时间找到您的PS3控制器，然后用USB电缆将其插入。 实用程序完成工具包的安装后，它将要求您运行驱动程序安装程序。 单击“运行”，将显示一个列表，其中现在应包括您的控制器。

Click the “Initialize All Connected Devices” button (don’t skip through with next button), let it install, and then click “Next.” This will configure the controller to be recognized as a PS3 controller, and install some drivers.

单击“初始化所有连接的设备”按钮(不要跳过下一个按钮)，进行安装， 然后单击“下一步”。 这会将控制器配置为被识别为PS3控制器，并安装一些驱动程序。

The next screen is for Bluetooth support, which you may not want because it requires a dedicated Bluetooth dongle to be “sacrificed.” Rightly so, there’s a huge “WARNING” label on this screen, because installing it to a wireless mouse dongle on accident will cause you to have a very bad time.

下一个屏幕是蓝牙支持，您可能不想要它，因为它需要“牺牲”专用的蓝牙加密狗。 没错，此屏幕上有一个巨大的“警告”标签，因为意外将其安装到无线鼠标加密狗将导致您度过非常糟糕的时光。

If you really want wireless support, you’ll need to plug in the sacrificial dongle, make sure it’s the ONLY device in the list, and then click “Initialize All Connected Devices.”

如果您确实需要无线支持，则需要插入牺牲加密狗， 确保它是列表中的唯一设备 ，然后单击“初始化所有连接的设备”。

Otherwise, feel free to hit “Next” and skip this process.

否则，请随时单击“下一步”并跳过此过程。

The next step is installing a virtual Xbox 360 Controller driver, which will trick Windows into thinking your PS3 controller is an Xbox 360 controller. This will make it work for more games.

下一步是安装一个虚拟的Xbox 360控制器驱动程序，它将诱使Windows认为您的PS3控制器是Xbox 360控制器。 这将使其适用于更多游戏。

To install the driver, click “Install virtual Xbox 360 Controller driver” and click “Next.”

若要安装驱动程序，请单击“安装虚拟Xbox 360 Controller驱动程序”，然后单击“下一步”。

After that, ScpToolkit will want to install a Windows Service to handle communication with the controller.

之后，ScpToolkit将要安装Windows服务来处理与控制器的通信。

Click “Install Windows Service” and click “Next.” You’re now done, and you should be able to use your PS3 controller in any game that supports Xbox 360 controllers. That’s practically every game that supports a controller, so go nuts. You can also .

单击“安装Windows服务”，然后单击“下一步”。 现在，您已经完成了操作，并且您应该能够在任何支持Xbox 360控制器的游戏中使用PS3控制器。 实际上，这是所有支持控制器的游戏，所以要疯了。 您也可以 。

翻译自:

ps2模拟器pc版